| 10440 | 8550-021 60 Meg ESDI Adapter Error.
|
| 10441 | 8550-021 60 Meg ESDI Adapter Error.
|
| 10442 | 8550-021 60 Meg ESDI Adapter Error.
|
| 10443 | 8550-021 60 Meg ESDI Adapter Error.
|
| 10444 | 8550-021 60 Meg ESDI Adapter Error.
|
| 10445 | 8550-021 60 Meg ESDI Adapter Error.
|
| 10446 | 8550-021 60 Meg ESDI Adapter Error.
|
| 10447 | 8550-021 60 Meg ESDI Adapter Error.
|
| 10450 | DIAGS Error - Replace drive (read write test failed)
|
| 10451 | DIAGS Error - Replace drive (read verify test failed)
|
| 10452 | DIAGS Error - Replace drive (seek test failed)
|
| 10453 | DIAGS Error - Replace drive (wrong drive type indicated)
|
| 10454 | DIAGS Error - Controller (controller test failed sector buffer test)
|
| 10455 | DIAGS Error - Controller (controller failure, invalid failure)
|
| 10456 | DIAGS Error - Controller ( | DIAG command failure)
|
| 10457 | DIAGS Error - Repl. drive (integrated controller test failure)
|
| 10458 | DIAGS Error - Repl. drive (integrated controller test failure)
|
| 10458 | DIAGS Error - If 8570-121 or 8570-A21 see ECA020
|
| 10459 | DIAGS Error - Replace drive ( | DIAG command failure)
|
| 10460 | DIAGS Error - Unknown. Repl. drive, then controller, then system board
|
| 10461 | DIAGS Error - Drive fromat error
|
| 10462 | DIAGS Error - Controller (head select error)
|
| 10463 | DIAGS Error - Drive (read/write sector error)
|
| 10464 | DIAGS Error - Drive (primary map unreadable)
|
| 10465 | DIAGS Error - Controller (ECC 8 bit error)
|
| 10466 | DIAGS Error - Controller (ECC 9 bit error)
|
| 10467 | DIAGS Error - Drive (soft seek error)
|
| 10468 | DIAGS Error - Drive (hard seek error)
|
| 10469 | DIAGS Error - Drive (drive soft error count execeeded)
|
| 10470 | DIAGS Error - Controller (attachment | DIAG error)
|
| 10471 | DIAGS Error - Controller (wrap mode interface error)
|
| 10472 | DIAGS Error - Controller (wrap mode drive selected error)
|
| 10473 | DIAGS Error - Unknown. Repl. drive, then controller, then system board
|
| 10474 | DIAGS Error - Unknown. Repl. drive, then controller, then system board
|
| 10475 | DIAGS Error - Unknown. Repl. drive, then controller, then system board
|
| 10476 | DIAGS Error - Unknown. Repl. drive, then controller, then system board
|
| 10477 | DIAGS Error - Unknown. Repl. drive, then controller, then system board
|
| 10478 | DIAGS Error - Unknown. Repl. drive, then controller, then system board
|
| 10479 | DIAGS Error - Unknown. Repl. drive, then controller, then system board
|
| 10480 | POST Error - Replace disk "C" (seek failure)
|
| 10480 | DIAGS Error - Controller (com/data-attn bad)
|
| 10481 | POST Error - Replace disk "D" (seek failure)
|
| 10481 | DIAGS Error - Controller (xfr req-ready bad)
|
| 10482 | POST Error - Replace controller (failed controller test)
|
| 10482 | DIAGS Error - Controller (drvsell-xfr ack bad)
|
| 10483 | POST Error - Replace controller (failed reset)
|
| 10483 | POST Error - If 8570-121 or 8570-A21 see ECA020
|
| 10483 | DIAGS Error - Controller (drvse10-config/stat bad)
|
| 10484 | DIAGS Error - Controller (hdse13-selected bad)
|
| 10485 | DIAGS Error - Controller (hdse12-selected bad)
|
| 10486 | DIAGS Error - Controller (hdse11-selected bad)
|
| 10487 | DIAGS Error - Controller (hdse10-selected bad)
|
| 10488 | DIAGS Error - Controller (rg - cmd cmplt 2)
|
| 10489 | DIAGS Error - Controller (wg - cmd cmplt 1)
|
| 10490 | POST Error - Replace disk "C" (read failure)
|
| 10490 | DIAGS Error - Controller (drive connected no test done)
|
| 10491 | POST Error - Replace disk "D" (read failure)
|
| 10499 | DIAGS Error - Controller Failure
|
