| 10101 DIAGS Error | Cannot detect presence of modem
|
| 10102 DIAGS Error | Card selected feedback error
|
| 10103 DIAGS Error | Port 102H failed register test
|
| 10106 DIAGS Error | Serial option cannot be put to sleep
|
| 10108 DIAGS Error | Async IRQ3 Error
|
| 10109 DIAGS Error | Async IRQ4 Error
|
| 10110 DIAGS Error | 16550 fails register test
|
| 10111 DIAGS Error | Internal wrap test of 16550 modem control lines failed
|
| 10113 DIAGS Error | 16550 transmit error
|
| 10114 DIAGS Error | 16550 receive error
|
| 10115 DIAGS Error | 16550 receive data not equal transmit data
|
| 10116 DIAGS Error | 16550 interrupt function error
|
| 10117 DIAGS Error | 16550 failed baud rate test
|
| 10125 DIAGS Error | Modem reset result code error
|
| 10126 DIAGS Error | Modem general result code error
|
| 10127 DIAGS Error | Modem S registers write/read error
|
| 10128 DIAGS Error | Modem turn echo on/off error
|
| 10129 DIAGS Error | Modem enable/disable result codes error
|
| 10130 DIAGS Error | Modem enable number/word result code error
|
| 10133 DIAGS Error | Connect results for 300 baud not received
|
| 10134 DIAGS Error | Connect results for 1200 baud not received
|
| 10135 DIAGS Error | Modem failed local analog loop test at 300 baud
|
| 10136 DIAGS Error | Modem failed local analog loop test at 1200 baud
|
| 10137 DIAGS Error | Modem does not respond to escape/reset sequence
|
| 10138 DIAGS Error | S reg 13 does not reflect correct parity or data bits
|
| 10139 DIAGS Error | S reg 15 does not reflect correct bit rate
Your Great New Jersey Web Site |